A selection of custom livestock and farm-metal builds we have sourced and made in Qingdao — each to the customer's drawing, QC-checked, and shipped from Qingdao Port. Use them as a starting point for your own part.
A repeat customer needed heavy cattle yard panels to a specific height and tube spec. We sourced the pipe, welded the frames on a jig, then ...
See the build →
Gates are where weld alignment matters most. We weld cattle gates on a dedicated jig so hinges and latches line up every time, then galvaniz...
See the build →
A sow unit needed adjustable farrowing crates with piglet-protect rails. We built to their drawing with deburred, smooth welds to protect an...
See the build →
Gestation stalls need a clean weld and a reliable floor bracket. We fabricate to drawing and finish for the barn environment.
See the build →
A finisher barn needed waste-reducing troughs. We formed the sheet, welded the anti-waste lip, then galvanized.
See the build →
Sheep troughs need to cut waste and stay clean. We weld a smooth galvanized trough to the producer's size spec.
See the build →
A sheep yard needed movable, safe panels. We welded galvanized mesh to a frame with foot and pin for quick reconfiguration.
See the build →
A goat unit wanted a raised feeder that cuts hay waste. We welded a galvanized feeder to their dimensions.
See the build →
We do not stock horse gear — this stall panel was fabricated to the customer's print, with smooth safe welds and a finish to match their bar...
See the build →
A training pen needed curved panels to a specific radius. We laser-cut, rolled and welded them for bolt-together assembly.
See the build →
A layer house supplied the cage design; we welded the structural frames and drilled to their hole pattern, then finished for the house.
See the build →
A kennel builder needed strong, chew-safe panels. We welded galvanized mesh into a frame and powder coated for a clean finish.
See the build →
Door frames need to fit the panel exactly. We fabricated stainless door frames to the kennel builder's dimensions, lock-ready.
See the build →
Run frames were made modular so the customer could extend runs on site. We bent and welded to a bolt-together design.
See the build →
A ranch needed heavy feed bunks in 2–6m lengths. We welded sheet and tube, then hot-dip galvanized.
See the build →
A dairy parlour needed self-locking headlocks for safe dosing. We welded to spec and galvanized.
See the build →
A farm needed robust brackets to mount drinkers. We welded and drilled to their hole pattern, then galvanized.
See the build →
A trailer builder outsourced welded components. We fabricated to print and inspected before shipping.
See the build →
An arena needed a gate to a custom width. We fabricated on a jig and finished to match the existing rail.
See the build →
A pet brand needed enclosure frames to their design. We welded and finished for a clean retail look.
See the build →One point of contact for custom metal parts and welded assemblies — sourced, quality-checked, and shipped from Qingdao.
QINGDAO FTAWANG